Instructions for Installing and Configuring the LabSim 5 Accelerator
LabSim Accelerator is a solution developed by TestOut to improve the speed of accessing LabSim 5 course content. Instead of constantly sending data over the Internet while LabSim is in use, LabSim Accelerator stores course content locally and only retrieves it over the Internet when needed. Using LabSim Accelerator, your course will run more quickly and have less connection slowdowns.
How LabSim Accelerator Works
- With LabSim Accelerator, LabSim 5 only communicates account and score information over the Internet, but retrieves course materials from inside the school network.
- LabSim Accelerator is aware of all course materials available to your school and constantly checks for new and updated content. Course content is patched and updated automatically without any work on your part.
- LabSim Accelerator can be configured to load all or only a subset of LabSim courses for which your students have licenses. Multiple LabSim Accelerators can be used at a single location to prepare specific course content ahead of time.
- The message "Accelerator On" is displayed in the upper right corner of the LabSim client once a LabSim course is launched. This message confirms that the LabSim 5 client is loading course content from the local Accelerator server.
- Windows Operating System: Windows 7 (64bit), Windows 8.1, Windows Server 2008, or Windows Server 2012
- Minimum Free Hard Drive Space: 8-10GB per course to be downloaded
- Minimum RAM: Recommended 2GB–4GB or more
- LabSim client, version 5 or higher
Installation of LabSim Accelerator
- Click here to download the LabSim Accelerator installation program.
Note: LabSim Accelerator is a server product and should not be installed on students’ individual machines. Academic institutions will typically need only one or two LabSim Accelerator installations.
- Click Save file and select a location to save the file. Click Save.
- Open LabSimAccelerator.exe, and click Run. Click Continue if prompted. The LabSim Accelerator Setup Wizard will automatically open.
- Click Next and select a folder on your local system where LabSim Accelerator will be installed. Then click Next.
- Click Install to begin the installation of LabSim Accelerator.
- Click Finish.
- Launch LabSim Accelerator, and log in with your existing LabSim administrator login and password.
Note: You do not need to use the same account every time you configure LabSim Accelerator if you have more than one administrator at your location. Figure 1: LabSim Accelerator Login Screen
Using LabSim Accelerator
Once you’ve logged in to LabSim Accelerator with your LabSim login and password and selected the configuration options, you can begin synchronizing the LabSim course content for which your students have licenses. (See below for configuration options)
Click Start Accelerator
. LabSim Accelerator will immediately begin synchronizing the content for the courses you have selected. Figure 2: LabSim Accelerator
LabSim Accelerator Interface
The LabSim Accelerator interface includes options for configuring various settings. The first time you log in, default settings are in place. You may leave the default settings or make changes. If you make changes, click Apply Configuration Changes
to save the changes. You may change them again at any time. Accelerator Content Store.
The Accelerator Content Store is the location on your computer to which LabSim course content is downloaded. Accelerator IP Address.
LabSim Accelerator distributes content using an internal Web Server. Provide the IP address for the Accelerator computer. LabSim Clients will use this IP address to contact the Accelerator server. Accelerator Web Server Port.
LabSim Accelerator uses port 48622 by default to allow you to run another Web server on the same machine as LabSim Accelerator. After LabSim Accelerator has been installed and configured, it will register itself with TestOut’s online training system to allow LabSim clients to access it. Synchronize.
By default LabSim Accelerator will attempt to download content at any time. You can specify an allowed time frame that will cause the Accelerator to check for updates only during the time window specified. Make sure that you allow enough time to download content to your server. LabSim Courses.
or Specific Courses
- If you select All, the content for all LabSim courses for which your students have licenses will synchronize.
- If you select Specific Courses, you may choose from the list of LabSim courses for which your students have licenses. Only the content from the courses you select with a checkmark will synchronize.
Note: Only courses marked with a checkmark will be available to LabSim clients via LabSim Accelerator. If a course was previously checked and the content downloaded, and then the checkmark is removed, the content will no longer be available.
When you have finished configuring LabSim Accelerator, you may close the configuration tool. LabSim Accelerator will continue to run in the background.
Understanding LabSim Accelerator Synchronization
LabSim Accelerator may take up to several hours to download a single course. LabSim clients will continue to pull course content directly from the Internet until the course has been completely downloaded. Note: While course materials are downloading to LabSim Accelerator, you may see some system slowdown on the LabSim Accelerator machine. This is due to heavy file writes on the local hard drive. You can check the download progress and status of LabSim Accelerator by re-launching the LabSim Accelerator configuration tool.
LabSim Accelerator and Windows Network Service
LabSim Accelerator uses a NETWORK SERVICE local Windows account to download course materials. This account does not have administrative privileges and may not have access to the Internet if your proxy server requires authentication. Please make sure that the directory you have chosen for course content downloads allows read/write access by the NETWORK SERVICE account. For proxy authentication, you may need to use the Internet Connection Settings link in the LabSim Accelerator interface to provide proxy server credentials.
Note: The Use current Windows account username and password setting will probably not work because the current Windows account for the service is NETWORK SERVICE.
System Security Settings
Network and file system security should be prepared so that LabSim clients can retrieve course materials through LabSim Accelerator. Security considerations include:
- File and folder permissions for the root folder of the Accelerator’s download folder
- Firewall exceptions to allow communication over the chosen Web server port.